1 of 1
- Her_lobo1
- New member
Offline - Registered: 3/30/2015
- Posts: 1
Can I use a Broken Arms Jig on a Dayton Arms 80% Lower reciever.
Can I use a Broken Arms Jig on a Dayton Arms 80% Lower reciever.
- Granpooba
- New member
Offline
- Registered: 7/03/2016
- Posts: 6
Re: Can I use a Broken Arms Jig on a Dayton Arms 80% Lower reciever.
Come on folks, somebody or Mike answer the question. Even thought I have lowers and jig coming from Broken, a friend of mine has a lower coming for Daytona. 
- justgurn
- New member
Offline
- From: Kansas
- Registered: 4/06/2016
- Posts: 9
Re: Can I use a Broken Arms Jig on a Dayton Arms 80% Lower reciever.
I believe Mike has mentioned in one of the posts he had modified the jig to work with most of the mil spec lowers. As for 100% surety, better get out the calipers. Good Luck!
- Mike
- Moderator
Offline
- Registered: 11/01/2013
- Posts: 122
Re: Can I use a Broken Arms Jig on a Dayton Arms 80% Lower reciever.
Im not positive if they are using the same forging house when they purchase their blanks. Ive heard many people say they work... And I still get the occasional call saying theirs are too wide.
I called them today. But the message I got when I called is that due to the high volume of orders they aren't taking phone calls. And all shipments are 7-10 business days out.
- Dan0
- New member
Offline
- Registered: 7/17/2016
- Posts: 1
Re: Can I use a Broken Arms Jig on a Dayton Arms 80% Lower reciever.
Sorry for the late reply, I just joined.
The answer is yes. I've complete two Daytona Tactical lowers on the Broken Arms Jig. I got a drill press for fathers day and am using for the 80$'ers.
"The will to win is not as great as the will to prepare to win."
1 of 1