1 of 1- Dgraham
- New member
Offline - Registered: 4/12/2016
- Posts: 1
80% AR15 Lowers
Does your jig drilling kit work on other MFG lower AR 15 80% lowers
- rashod
- New member
Offline
- Registered: 4/15/2016
- Posts: 1
Re: 80% AR15 Lowers
I'm New to this ,but can you use the Ar 15 top plates on the 308side plates.
- hueston3
- New member
Offline
- Registered: 5/07/2016
- Posts: 2
Re: 80% AR15 Lowers
I have already ordered the jig kit with a AR 15 lower but would also like to know if the BA jig will work on other manufacture's lowers. I see the question was asked a month ago with no response.
- jimmy_P
- New member
Offline
- Registered: 5/08/2016
- Posts: 3
Re: 80% AR15 Lowers
.hueston3 and dgraham: I found this on the jig page.
We modified the jig to work with Broken Arms lowers, and standard Mil-Spec forged lowers
rashod: i found this on the 308 side plate page.
308 side plates ONLY. These side plates can be used with our AR15 top plates
the parts description is there for a reason guys >_<
Last edited by jimmy_P (5/07/2016 9:37 pm)
- hueston3
- New member
Offline
- Registered: 5/07/2016
- Posts: 2
Re: 80% AR15 Lowers
With all due respect jimmy_P, if you read some of the post on this forum, you would read that there has been a issue or two. I did read the parts description, sometimes parts descriptions may not be accurate. I would like to hear from a manufactures rep. >_<
- Mike
- Moderator
Offline
- Registered: 11/01/2013
- Posts: 122
Re: 80% AR15 Lowers
Due to the differences in external dimensions not all lowers will work. But the jig does work with Broken Arms lowers, and standard mil-spec forged lowers.